Card Reader 2 Wiegand services (card reader, keypad, biometric device, etc.) Inputs EOL supervised inputs (Types: 1, 2, 3, 4) 2 door contacts 2 Request-to-exit switches 2 Auxiliary (i.e. tamper from Card Reader, motion detector – used in access/security,etc.) 1 Tamper switch Outputs 2 Doorstrike/maglocks, Form C Relay 5A @ 24 V DC/AC, MOV protection. +12VDC @ 350 mA available for each lock (lock power protected, internally wired and monitored) 4 LED driver, open-controller current sink @ 50mA, 24VDC maximum, current limited, (LED or Buzzer driver) 2 Auxiliary relays, Form C Relay 5A @ 24 VDC/AC, MOV protection Output Voltages 2 Card readers +5VDC @ 50 mA each, (0.10A total) each individually fused with a resettable fuse 2 Card readers +12VDC @ 160mA each, (0.32A total) each individually fused with a resettable fuse 1 Auxiliary +12VDC @ 50mA, fused with a resettable fuse 1 DC Power out +10 to +15VDC @ 0.25A fused with a resettable fuse Device Type LINKnet device only Communications Ports Delta LINKnet @ 76800 bps (maximum 12 door modules per ASM-24E) Device Address Set via Address DIP switches (standard device address range: 0 to 12 on LINKnet) Connectors Removable screw-type terminal connectors Wiring Class Class 2 Power 24 VAC @ 75VA Note: transformer must not be shared with any other products Ambient 32º to 131ºF (0º to 55ºC) 10 to 90% RH (non-condensing) Dimensions 5 ⅞ x 9.5 x 2.5 in. (14.8 x 24.1 x 6.4 cm) with housing 1.49 lb. (680 g) with housing Compliance CE FCC Listings UL294 Listed