- Trang chủ
- Sensor & Transmitter
- Series 605 Magnehelic Differential Pressure Indicating Transmitter
Series 605 Magnehelic Differential Pressure Indicating Transmitter
Lượt xem: 1193
Danh mục : Sensor & Transmitter
Nhãn hiệu : Dwyer
The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure.
Mã | Mô tả | Giá thành viên | Mua hàng |
---|---|---|---|
605-0 | 605-0 Differential pressure indicating transmitter, range 0-.50" w.c., max. pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±3% mechanical accuracy | Đăng nhập | Đăng nhập |
605-11 | 605-11 Differential pressure indicating transmitter, range .25-0-.25" w.c., max. pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±3% mechanical accuracy | Đăng nhập | Đăng nhập |
605-2 | 605-2 Differential pressure indicating transmitter, range 0-2.0" w.c., max. pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy, ±2% mechanical accuracy | Đăng nhập | Đăng nhập |
605-250PA | 605-250PA Differential pressure indicating transmitter, range 0-250 Pa, max. pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±2% mechanical accuracy | Đăng nhập | Đăng nhập |
605-500PA | 605-500PA Differential pressure indicating transmitter, range 0-500 Pa, max. pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy, ±2% mechanical accuracy | Đăng nhập | Đăng nhập |
605-6 | 605-6 Differential pressure indicating transmitter, range 0-6.0" w.c., max. pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy, ±2% mechanical accuracy | Đăng nhập | Đăng nhập |
The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4 to 20 mA control loop powered by a 10 to 35 VDC supply.