0933.850.066
(028).6258.9683
info@buildingsparepart.com

Liên hệ với chúng tôi

Series F6 & F7 Level Switches - Vertical F7-SB

Lượt xem: 578

Danh mục : Sensor & Transmitter
Nhãn hiệu : Dwyer
Dòng sản phẩm : Series F6 & F7 Level Switches - Vertical

F7-SB Vertical level switch, Buna-N & epoxy float, 316SS stem, temperature limit 220°F (105°C), pressure limit 150 psig (10 bar), 0.60 min. specific gravity, electrical rating 25 VA: 1A @ 220 VAC, 22 AWG 18" (45 cm) wire leads, 1/8" male NPT mounting, UL listed, weight 2 oz (58 g)

Mô tả Giá thành viên Mua hàng
F7-SB F7-SB Vertical level switch, Buna-N & epoxy float, 316SS stem, temperature limit 220°F (105°C), pressure limit 150 psig (10 bar), 0.60 min. specific gravity, electrical rating 25 VA: 1A @ 220 VAC, 22 AWG 18" (45 cm) wire leads, 1/8" male NPT mounting, UL listed, weight 2 oz (58 g) Đăng nhập Đăng nhập

Series F6 & F7 compact level switchescombine low cost and reliability with fast,simple installation. Hermetically sealed reed switches are actuated by magnetspermanently bonded inside the float and can be easily adapted to open or close a circuit onrising or falling levels. Vertical mount models are shipped with normally open switchcontacts which close as the float rises toward the mounting threads. Reverse switch actionby removing the float, rotating it end-for-end and replacing it on the stem. Vertical modelsmount internally, oriented within 30° of vertical, or select optional fittings for externalmounting. Switch ratings are suitable for many solid state control systems and monitorsor alarms. Simple relay interfaces can be used for higher current applications

Features
  1. Electrical rating 20 VA: 0.08A @ 240 VAC, 22 AWG 11.8" (30 cm) wire leads
  2. 1/8" male NPT mounting
  3. Weight 1.59 oz (45 g)
  4. Hermetically sealed reed switches are actuated by magnets permanently bonded inside the float and can be easily adapted to open or close a circuit on rising or falling levels
  5. Shipped with normally open switch contacts which close as the float rises toward the mounting threads
  6. Reverse switch action by removing the float, rotating it end-for-end and replacing it on the stem
  7. Mount internally, oriented within 30° of vertical, or select optional fittings for external mounting
  8. Switch ratings are suitable for many solid state control systems and monitors or alarms
  9. Simple relay interfaces can be used for higher current applications
Series F6 & F7 compact
 
 

Dòng F6 & F7 nhỏ gọn

 

1 F6_F7_i_Vertical_2020
2 F6_F7_Bulletin
3 F6_F7_Instruction Bulletin