BACnet Device Profile BACnet Advanced Application Controller (B-AAC) Inputs 6 to 9 Binary inputs (Panasonic 2-wire relay switch or dry contact inputs with status feedback & LED status indication) 1 Universal input, with LED status indication Outputs 4, 8, 12, 24 or 36 Panasonic lighting relays Outputs (maximum 4 relays or 6 switches per output) Uses Panasonic WR-61xx relays Sweeper Ports Sweeper input port with LED status indication master override or sweeper input port, with command sequencer Sweeper output port with LED status indication connects to another lighting controller’s sweeper input port to continue the sweeper sequence On-board Overrides ON scan button provides ALL ON override control OFF scan button provides ALL OFF override control Communications Ports Twisted-Pair Ethernet (10-BaseT) @ 10 MB, BACnet IP, BACnet over Ethernet Main LAN (NET1) BACnet MS/TP @ 9600, 19200, 38400 or 76800 bps(default) (maximum of 99 devices per BACnet MS/TP segment) SubLAN (NET2) Delta LINKnet @ 76800 bps (maximum 12 network sensors on LINKnet) Connectors Removable screw-type terminal connectors Technology 32-bit Processor 2 MB (16 megabit) Flash memory 512 KB SRAM memory CPU status LED Real-time clock with battery back up Device Type Configured as either System or Subnet Device Address Set via DIP switch and jumpers or software setup Wiring Class Class 2 Power 24 VAC 50 VA (including Panasonic relays and switches, 4 per output) Ambient 0º to 55ºC (32º to 131ºF) 10 to 90% RH (non-condensing) Dimensions 28.9 x 10 x 4.8 cm (11.05 x 4 x 1.9 in.) 861 g (1.9 lb.) with housing Compliance CE FCC Listings UL 916 Listed BTL